How to Clean and Care for a Liberator Wedge Cover

If you're wondering how to clean a sex wedge, the short answer is: unzip the outer cover, wash it in the machine, and leave the moisture-resistant liner underneath alone. That's the core process across the whole line (Wedge, Ramp, Jaz, Esse). None of the listings specify an exact wash temperature or dry cycle, so here's what's actually documented and the general textile-care practice that keeps the liner intact.

What's actually documented

Checked directly against the current listings: every core piece describes the same two-part system, a removable, machine-washable outer cover plus a moisture-resistant inner liner that isn't meant to be removed or washed.

None of the listings state a specific water temperature or dryer setting. That's consistent across the line, not a gap in one product's documentation.

The actual care process

Unzip and remove the outer cover. This is the washable layer; it's designed to come off independently of the foam and liner underneath.

Wash on a gentle, cold-to-warm cycle. Since no specific temperature is published, standard textile-care practice applies: cold or cool water is the safer default for microfiber and microvelvet, since hot water risks shrinking or damaging synthetic fibers over repeated washes.

Air dry or use a low-heat tumble setting. High heat is the more common cause of damage to synthetic covers over time than the wash cycle itself; air drying is the safer default if you're unsure.

Leave the inner liner alone. The moisture-resistant liner stays on the foam and isn't part of the washable cover system. It's there specifically to keep moisture from reaching the foam itself, which is the actual reason the foam holds up over years of use.

How often to actually wash it

There's no manufacturer-stated washing schedule, but the practical guidance mirrors any fabric that regularly contacts skin: wash after visible staining or odor, and otherwise on a normal, reasonable cadence rather than after every single use. Washing far more often than needed accelerates wear on the zipper and seams faster than moderate, as-needed washing does, so treat it like a couch cushion cover rather than a bedsheet.

What to do about spot stains between washes

For a stain that doesn't need a full wash cycle, a damp cloth with a small amount of mild, fragrance-free soap and a cold-water rinse is the safer spot-clean approach for microfiber and microvelvet. Avoid bleach or strong solvents entirely; they're more likely to strip color and weaken synthetic fibers than to actually improve the clean. Always let the cover air dry fully before zipping it back onto the liner, since trapping moisture against the liner is exactly what the liner exists to prevent from reaching the foam.

Why the liner matters more than the cover

The outer cover is what you see and what makes the piece comfortable against skin; the liner is what actually protects the foam from the moisture that would otherwise degrade it over time. A wedge with a washable cover but no real liner underneath is missing the part that does the actual protective work, which is worth checking for on any listing you're comparing against Liberator's line. Check current price on Amazon →

FAQ

Can you machine wash a Liberator Wedge cover? Yes. The outer cover is removable and machine-washable across the line. No specific wash temperature is published, so a gentle cold-to-warm cycle is the safer default for the microfiber and microvelvet materials used.

Can you wash the inner liner too? No. The moisture-resistant liner is meant to stay on the foam; it's not part of the removable, washable cover system. Its job is protecting the foam from moisture, not being laundered itself.

What temperature should I wash the cover at? Liberator doesn't publish a specific temperature. Standard textile-care practice for microfiber and microvelvet favors cold-to-warm water and low-heat or air drying, since high heat is the more common cause of damage to synthetic covers over repeated washes.

How do I know if a cheaper wedge actually has a real protective liner? Check the listing specifically for a stated moisture-resistant or waterproof liner, not just a washable cover. A washable outer cover alone doesn't protect the foam underneath the way a genuine liner does; see our Liberator Wedge review for what a well-built version of this system looks like.

How often should I actually wash the cover? There's no published schedule. A reasonable approach is to wash after visible staining or odor rather than after every use, and spot-clean minor marks with a damp cloth and mild soap in between, since washing far more often than needed wears out the zipper and seams faster than it needs to.

As an Amazon Associate we earn from qualifying purchases. It never changes what you pay or what we recommend. Intended for adults 18+.